Untitled Document
keranvazin.com

For atmospheric corrosion protection
 COROPUR stands for moisture-hardening, single component coating systems that can be applied by brushing, rolling or spraying procedures. Alongside the simplicity of application and their high tolerance to moisture, COROPUR coatings feature a combination of great surface strength with high elasticity, and so ensure long-term corrosion protection of steel component parts.
 COROPUR is normally applied at least as a two-layer coating (DFT 60-80 μm per layer). COROPUR Ferro, COROPUR Ferro LS and COROPUR Cover RAL are mainly used for th corrosion protection of steel parts according to the requirements of DIN EN ISO 129-44-5 (corrosivity category C1 - C5-I and C5-M), in combination with the appropriate primers

for steel water constructions
 COROPUR stands for moisture-hardening, single component coating systems that can be applied by brushing, rolling or spraying procedures. Alongside the simplicity of application and their high tolerance to moisture, COROPUR coatings feature a combination of great surface strength with high elasticity, and so ensure longterm corrosion protection of steel component parts. COROPUR is normally applied at least as a three-layer coating (DFT 150-250 μm per layer). COROPUR Tar, COROPUR Tar 21, COROPUR TF 21 and COROPUR Non Abrasiv are mainly used for the corrosion protection of steel water engineering constructions according to the requirements of DIN EN ISO 129-44-5 (corrosivity category Im1, Im2 and Im3 for direct contact with freshwater, seawater and soil) in combination with the appropriate primers.
Product-information Application/Properties Product
COROPUR Zink M

Primer for all kind of grind blasted steel constructions.

COROPUR Zink M
COROPUR PI

Primer with temporary corrosion protection for steel parts which were machine grinded and will be welded.

COROPUR PI
 

Precoating for manually rust removed steel constructions.

COROPUR Adhesion & Insulating primer
COROPUR Fix

Adhesion primer for mineral materials like concrete, plaster...

COROPUR Fix
Tar
Tar 21

COROPUR Tar/Tar 21 has a successful track record for use in accordance to DIN EN ISO 12944-5 for the long-term corrosion protection of steel components classified in the corrosivity categories Im 1 (Freshwater); Im2 (Seawater or brackish water) and Im 3 (Soil).

COROPUR Tar 21 fulfils the requirements of the cathodic sub-surface test, relative to DIN EN 10290, for the corrosion protective coating of steel pipe work with polyurethane.

COPOPUR Tar /
Tar 21
Ferro
Ferro LS

COROPUR Ferro is primarily applied for the long-term corrosion protection of steel components, relative to DIN EN ISO 12944-5, exposed to aggressive atmospheres. These are typically classified in the corrosivity category C5-I (very highly polluted industrial atmospheres) and C5-M (aggressive marine atmospheres). We recommend the light-stable COROPUR Ferro LS version for outdoor applications.

COROPUR Ferro /
Ferro LS
Cover RAL
Cover 9010

COROPUR Cover RAL is engineered for long-term corrosion protection of steel components exposed to attack from extreme atmospheric conditions. Modelled on the DIN EN ISO 12944-5 corrosivity categories C5-I (very highly polluted industrial atmospheres) and C5-M (aggressive marine atmospheres). COROPUR Cover RAL offers outstanding colour-fast properties and surface protection. The excellent UV-resistance of COROPUR Cover RAL make it applicable as top coat to conventional epoxide systems.

COROPUR Cover RAL /
COROPUR Cover RAL 9010
COROPUR Alu
COROPUR Alu will be particularly used in the maritime sector and is temperature resistant up to 160°C. At tank coatings COROPUR Alu contributes to ensure the lowest possible temperature inside the tank by means of reflection of the aluminium pigmentation.

COROPUR Alu
Non Abrasiv
Non Abrasiv LS
COROPUR Non Abrasiv has been specially developed for applications in steel water construction in accordance with DIN EN ISO 12944-5. Especially suited for use in the corrosivity categories: Im 1 (Freshwater); Im2 (Seawater or brackish water) and Im 3 (Soil). The German Federal Institute for Water Construction (BAW) has classified this corrosion protection system as suitable for "Use under stronger mechanical loads". We recommend the light-stable COROPUR Non Abrasiv (LS) version for outdoor applications.

COROPUR Non Abrasiv /
COROPUR Non Abrasiv LS
(both with Activator A-1949)
COROPUR TF 21
COROPUR TF21 is a tough-hard, very stress resistant tar-free cover coating. It can be applied even as a mono-system for mid level corrosion protection replacing tar coatings in many areas. It shows good resistance in pH range 5 to 10.

COROPUR TF 21
(with Activator A-1786)
Silico Zink ME II
Coro Silico Zinc ME II is a single-component, silicone-primer used for high temperatur cover coatings like Coro Silico Ferro and Coro Silico Alu. CORO Silico Zink ME II
CORO Silico Ferro
Coro Silico Ferro is a single-component, silicone-iron filling cover coating with good atmospheric resistance and temperature resistant up to 600°C. CORO Silico Ferro
CORO Silico Alu
Coro Silico Alu is a single-component, silicone-aluminium-cover coating with good atmospheric resistance and a temperature resistance up to 600°C. CORO Silico Alu
Sliding-Agent
COROPUR Sliding-Agent lastingly improves the smoothness of the surface of Coropur Non Abrasiv by means of chemical linking to the surface.
COROPUR Sliding-Agent
Thinner A-851
COROPUR-Thinner A-851 is indispensable for the dilution of COROPUR products in order to obtain the required viscosity for brush and roller coating.
COROPUR Thinner
A-851 (brush applied)
Thinner T-1900
COROPUR-Thinner T-1900 is indispensable for the dilution of COROPUR products in order to obtain the required viscosity for brush and roller coating.

COROPUR Thinner T-1900 (spray applied)
 
Untitled Document