Untitled Document
keranvazin.com

The CHEMOLINE CN product line is based on high-quality rubber types and mixtures that cover a great diversity of applications in environmental protection and in the process industries. REMA TIP TOP supplies these pre-vulcanised rubber lining systems complete with a bonding-friendly CN-base layer, which enables them to be used on all steel or concrete substrates. German DIBt approval for use in the storage of water-hazardous substances acc. to §19 of the German Water Ecology Act is in place for many CHEMOLINE CN systems. An outstanding feature of the CHEMOLINE CN materials is their extremely high chemical, mechanical and thermal resistance. They are applied with the proven two-component BC 3000 or BC 3004 REMA TIP TOP bonding systems in a cold-curing process. The non-porous rubber sheets are produced by vacuum extrusion in layer thicknesses of 2 to 6 mm.

 

Non-vulcanised CHEMOLINE soft rubber lining systems are suitable for use in environmental protection and in process industries where the greatest chemical, thermal and mechanical resistance is demanded. TC 5000 Series vulcanising bonding systems enable their use at operating temperatures of up to 120° C. These bonding systems are distinguished by their great bond strength. According to their formulation, non-vulcanised CHEMOLINE soft rubber systems are vulcanised in autoclaves, or they vulcanise at ambient temperature after being applied at the construction site. German DIBt Approval for use in the storage of water-hazardous substances acc. to §19 of the WHG (German Water Ecology Act) is in place for many non-vulcanised CHEMOLINE systems. The non-porous rubber sheets are produced by vacuum

COROFLAKE Trowelled lining
COROFLAKE lining systems are applied with a trowel and protect metallic components against aggressive media under immersion conditions. They are based on polyester and vinyl ester resins and reinforced with micro-thin C-glass flakes. Whereas the chosen resin ensures excellent chemical resistance, the parallel alignment of the glass flakes to the underlying surface provides outstanding permeation resistance. A nominal thickness of 2.0 mm is achieved with just two layers. These COROFLAKE trowel lining systems can be used for wide media range at temperatures up to 90° C under immersion conditions

For atmospheric corrosion protection
COROPUR stands for moisture-hardening, single component coating systems that can be applied by brushing, rolling or spraying procedures. Alongside the simplicity of application and their high tolerance to moisture, COROPUR coatings feature a combination of great surface strength with high elasticity, and so ensure long-term corrosion protection of steel component parts.
COROPUR is normally applied at least as a two-layer coating (DFT 60-80
μm per layer). COROPUR Ferro, COROPUR Ferro LS and COROPUR Cover RAL are mainly used for th corrosion protection of steel parts according to the requirements of DIN EN ISO 129-44-5 (corrosivity category C1 - C5-I and C5-M), in combination with the appropriate primers

for steel water constructions
COROPUR stands for moisture-hardening, single component coating systems that can be applied by brushing, rolling or spraying procedures. Alongside the simplicity of application and their high tolerance to moisture, COROPUR coatings feature a combination of great surface strength with high elasticity, and so ensure longterm corrosion protection of steel component parts. COROPUR is normally applied at least as a three-layer coating (DFT 150-250 μm per layer). COROPUR Tar, COROPUR Tar 21, COROPUR TF 21 and COROPUR Non Abrasiv are mainly used for the corrosion protection of steel water engineering constructions according to the requirements of DIN EN ISO 129-44-5 (corrosivity category Im1, Im2 and Im3 for direct contact with freshwater, seawater and soil) in combination with the appropriate primers.

 REMACOAT stands for highly-reactive 2-component spray coatings based on polyurea. Application is undertaken with 2K-high pressure airless injection machines. In combination with appropriate primers, REMACOAT is suitable for the coating of steel, concrete, light metal, plastics and many other materials. REMACOAT is insensitive to moisture, cures even at very low temperatures and is relatively insensitive to ambient conditions. REMACOAT material is available in hardnesses of from 60 shore A to 50 shore D, and can be used as a multifunctional surface protection, e.g. for component sealing, corrosion protective coatings, protection against sticking and wear. The layer thickness can be varied and is applied as a single layer of 1.5 mm to 25 mm thickness and more, according to the application.

 

These are comprised of the same resins as the TOPLINE series but with a larger portion of resin to provide the best possible chemical resistance. The lining begins with the priming coat, followed by a filler layer, two glass mats and a surface tissue. A sealing layer, rich in resin, completes the 3.0 to 4.0 mm thick lining. The glass mats and the flexible resin allow this lining to be used at operating temperatures of 80° C and to be cleaned with steam-jet equipment. In addition, this lining can bridge cracks in concrete of up to 0.2 mm width.

REMA TIP TOP Repair systems are based on high-quality epoxy or vinyl ester resins as well as synthetic rubber. Depending on the type of rubber lining, our REMA TIP TOP SOFT-RUBBER CEMENT or CHEMONIT REPAIR CEMENT A+B is used for quick and durable repair of damaged rubber linings. Further systems have been formulated for the refurbishment of steel structures and preparation of concrete surfaces. The ease of application properties allow smaller repairs to be carried out professionally by the maintenance staff. REMA TIP TOP supplies its repair systems in perfectly harmonized two-component packing drums.

Untitled Document